In the application list below you will find information about the spokes found in the spoke sets.
You can can see length, diameter, size of the nipple and also a reference to the original article number (OEM Part. Nr).
All spokes are replacement spokes are not exact copies. Some spokes can vary in length, bend or angle from the original, and this also applies to the nipples. Once you have installed and tensioned spokes, they will sit properly in the hub.All spokes are replacements not replicas. Some spokes may vary in length, bend or angle from original but when assembled and tensioned the spokes will bed and sit correctly in the wheel.
Important! We recommend that you check the following before purchasing:
Double check Always year of your motorcycle.
Also if your boss is a orginalnav or eftermarknadsnav or if the wheel is switched to another brand.
Also measure the holes in the rim to use and order the right kind of nipple to your spokes. You can order a different size at no extra cost. The hole should be about 1 mm larger than the nipple. You can see the nipple sizes supplied with your spokes is in the application list below.
You can can see length, diameter, size of the nipple and also a reference to the original article number (OEM Part. Nr).
All spokes are replacement spokes are not exact copies. Some spokes can vary in length, bend or angle from the original, and this also applies to the nipples. Once you have installed and tensioned spokes, they will sit properly in the hub.All spokes are replacements not replicas. Some spokes may vary in length, bend or angle from original but when assembled and tensioned the spokes will bed and sit correctly in the wheel.
Important! We recommend that you check the following before purchasing:
Double check Always year of your motorcycle.
Also if your boss is a orginalnav or eftermarknadsnav or if the wheel is switched to another brand.
Also measure the holes in the rim to use and order the right kind of nipple to your spokes. You can order a different size at no extra cost. The hole should be about 1 mm larger than the nipple. You can see the nipple sizes supplied with your spokes is in the application list below.